Features
SIMPLE TO PROGRAM
• Cutting-edge microprocessor control and user programmability provides programming versatility.
• In addition to manual programming, you can store up to twelve frequently used combinations of rotation speed (100-2000 rpm), run time (1-99 minutes), and rotor acceleration (Low, Medium or High).
• Programs are easy to retrieve or clear.
• The user-friendly display visually confirms inputs, current settings, or operation cycle status.
BENEFITS FOR YOUR LABORATORY
• Loading and pad alignment are simple and foolproof.
• The semi-transparent sample chamber allows visual confirmation of correct sample volume.
• Patented flow control delivers consistent results. Dual addition ports allow pre-wetting—for excellent cell recovery.
• Because damaged spring clips can affect recovery, we use reliable coil springs.
• Standard chambers come in single and dual configurations to suit every need.
Request Information
Specifications
• Chamber Volume: Dual 0.3 mL per well (0.6 mL per chamber); Single 0.5 mL per chamber; Magnum 6.0 mL per chamber
• Rotor Slide Capacity: Up to 8 slides and Cytopro chambers
• Rotor Speed: 100 to 2000 rpm (±5%) user programmable.
• Operating Time: Programmable 1 to 99 mins
• Dimensions (W x H x D): 43 cm x 25 cm x 54 cm (17” x 10” x 21”)
• Clearance Height (lid open): 58 cm (23”)
• Weight: 10.4 kg (22.5 lb.)
• Electrical Requirements: 100 to 240 V (±10%) @ 50-60 Hz
• Fuses: 2.0 Amp time-lag (Type T) (5 x 20 mm) (2 required)
• Power Consumption: 200 Watts Maximum
• Safety: Lid Interlock - lid must be closed for operation, and is locked down during rotor rotation
Request Information
