En Es
Categories

Erbe Elektromedizin

Erbe Elektromedizin

Develops, manufactures and sells systems for electrosurgery, vessel sealing, argon plasma coagulation, waterjet surgery and cryosurgery
Products Summary
Close

About Erbe Elektromedizin

Number of Employees: 400-999
Year of Establishment: 1851 
Develops, manufactures and sells systems for electrosurgery, vessel sealing, argon plasma coagulation, waterjet surgery and cryosurgery

Recently updated

Forceps
BiClamp LAP

BiClamp LAP forceps allow tissue structures to be coagulated over larger areas without the need for individual dissection of vessels. It offers effective and rapid coagulation due to the optimal synchronization of the instrument and the VIO generator and is reusable.
More details

Electrosurgical Unit
VIO 50C

The VIO 50C electrosurgical unit meets all the requirements of electrosurgical procedures in outpatient medical practices. With monopolar cutting and monopolar and bipolar coagulation, it can be integrated into MediTop ENT units and controlled by the ENT units’ multi-functional footswitch.
More details

Surgery Unit
BiClamp knife 220

The BiClamp knife 220 is a multifunctional, single-use instrument for open surgical procedures and is valid for sealing vessels up to 7 mm in diameter. The vessel is grasped, sealed, and mechanically dissected in a single workflow, preventing inadvertent thermal effects to adjacent tissue due to backside temperature at the jaws of below 40°C.
More details

Surgery

Forceps
BiClamp LAP

BiClamp LAP forceps allow tissue structures to be coagulated over larger areas without the need for individual dissection of vessels. It offers effective and rapid coagulation due to the optimal synchronization of the instrument and the VIO generator and is reusable.
More details

Electrosurgical Unit
VIO 50C

The VIO 50C electrosurgical unit meets all the requirements of electrosurgical procedures in outpatient medical practices. With monopolar cutting and monopolar and bipolar coagulation, it can be integrated into MediTop ENT units and controlled by the ENT units’ multi-functional footswitch.
More details

Surgery Unit
BiClamp knife 220

The BiClamp knife 220 is a multifunctional, single-use instrument for open surgical procedures and is valid for sealing vessels up to 7 mm in diameter. The vessel is grasped, sealed, and mechanically dissected in a single workflow, preventing inadvertent thermal effects to adjacent tissue due to backside temperature at the jaws of below 40°C.
More details

Cryosurgery Unit
ERBECRYO 2

The ERBECRYO 2 cryosurgery unit with single-use flexible probes is the next generation of Erbe cryogenic technology that is designed with an emphasis on reproducibility. It allows the target tissue to be frozen in front of the probe cryogenically and tangentially, allowing clinical applications in difficult anatomical areas and hard-to-reach target areas.
More details

Electrosurgical Unit
APCapplicator

The APCapplicator is an electrosurgical multi-talent that offers convenient activation of all functions with one hand and allows users to switch quickly from surgical step to surgical step without having to change instruments. In addition to “straight” non-contact argon plasma coagulation, other electrosurgical options are integrated in the handle: cutting and coagulation with spatula or needle electrode.
More details

Electrosurgical Unit
APC 3

The APC 3 Electrosurgical Unit is designed for argon plasma coagulation with the operating convenience of the logical and plausible VIO 3 interface that guides the user through each menu, suggesting experienced starting settings for APC applications. APC 3 modes support the full range of APC applications, while also facilitating argon-supported cutting and offering new options of its proprietary hybrid technologies – APC combined with Erbe’s electrosurgical or waterjet technology.
More details

Suction Pump
ESM 2

The ESM 2 suction pump allows the type of activation and degree of suction to be adjusted via the interface of the ERBEJET 2. Activation occurs either simultaneous to the application of the waterjet. The suction pump can be programmed to continue running for a certain time after waterjet is no longer activated.
More details

Irrigation Pump
EIP 2

The EIP 2 irrigation pump for endoscopic procedures provides a pulsed jet of sterile water for improved procedural site visualization. It is ideal for rinsing substances such as blood and fecal matter from the procedural site and instruments.
More details

Hydrosurgery Device
ERBEJET 2

The ERBEJET 2 dissects sharply and precisely with minimal trauma to fibrin–rich structures such as vessels, nerves and ducts. It offers enhanced anatomic visibility, uncovering structures not commonly identified using other techniques – including blunt dissection. The ultimate in precision and tissue-selectivity, the ERBEJET 2 produces no heat and can be used to define anatomy and dissection planes prior to transection.
More details

Electrosurgical Unit
APC 2

APC 2 electrosurgical unit for argon plasma coagulation uses a non-contact procedure to ensure no sticking of the instrument tip to the tissue and is equally effective for surface coagulation, uniform hemostasis and devitalization. Its better dosage of penetration depth leads to safer application and it ensures minimal carbonization and smoke plume formation, as well as minimal pollution through unpleasant odors.
More details

Electrosurgical Unit
VIO 300 S

The VIO 300 S electrosurgical unit designed for use in clinics or specialist surgical ORs provides optimum surgical support for almost any discipline as well as including a range of additional indications. Its operational design S enables fast, direct access to the program parameters and its generator module offers automatic power adjustment for all control technologies.
More details

Electrosurgical System
VIO 200 D

The VIO 200 D electrosurgical system for surgical and endoscopic procedures provides optimum surgical support for almost any discipline as well as including a range of additional indications. It offers automatic power adjustment for all control technologies and is tailored precisely to individual needs – both in terms of hardware and software.
More details

Smoke Evacuation System
IES 3

The IES 3 smoke evacuation system eliminates 98.6 % of the smoke with evacuation 1 cm directly above the source. Its ULPA-15-filter removes 99.9995 % of the 0.1 μm particles in the operating room for a safe working environment.
More details

Electrosurgical Unit
VIO 100 C

The VIO 100 C is a compact generator with proprietary VIO modes designed for specialty outpatient practices. Compact and lightweight, it has up to four storable programs and enables return electrode monitoring.
More details

Electrosurgical Instrument
APCapplicator

The APCapplicator electrosurgical instrument features a light-weight ergonomic design and allows for convenient activation of all functions using one hand. Its ReMode function enables convenient toggling between program settings and modes, making it ideal for open and laparoscopic procedures, from incision and mobilization, to tissue ablation and homogenous coagulation.
More details

Multi-Function Probe
HybridKnife

The HybridKnife multi-function probe combines the VIO electrosurgical system and the ERBEJET 2 hydrosurgery system in a single instrument for endoscopic surgery. It offers high pressure needle-free injection and allows the user to cut and coagulate with the company’s proprietary voltage and spark control.
More details

Electrosurgical System
VIO 200 S

The VIO 200 S electrosurgical system features Constant Voltage Regulation with Power Dosing to automatically deliver the lowest effective adjusted power output in all modes, including both CUT and COAG. Other features include up to nine storable programs and a user-friendly interface that reduces visual information to the essentials, thereby simplifying its operation.
More details

Electrosurgical System
VIO 300 D

The VIO 300 D is an electrosurgical system for interventional endoscopy that features Constant Voltage Regulation with Power Dosing to automatically deliver the lowest effective adjusted power output in all modes, including both CUT and COAG. It also features Spark Recognition technology that automatically detects the formation of micro-electric arcs (sparks) for controlled and reproducible cuts, e.g. length and quality in tissue with high or extremely low impedance.
More details

Electrosurgical Unit
VIO 3

The VIO 3 is an electrosurgical unit with a comfortable and visual user interface that reacts immediately to changing tissue parameters during surgical interventions, regardless of the electrode shape and incision direction. It displays all active instruments during the operation and provides guidance by suggesting experienced starting settings used in various clinical applications, resulting in less setting adjustment or modifications.
More details
Copyright © 2000-2024 TradeMed.com. All rights reserved. | Terms And Conditions