En Es
Categories

Ginevri

Ginevri

Manufactures advanced medical equipment and solutions for neo-natal care, such as infant incubators, transport incubators, infant warmers, radiant heaters and phototherapy lamps, including fiber optic bili lights as well as baby cots, bilimeters and oxygen tents
Products Summary
Close

About Ginevri

Number of Employees: 20-99
Year of Establishment: 1954
Manufactures advanced medical equipment and solutions for neo-natal care, such as infant incubators, transport incubators, infant warmers, radiant heaters and phototherapy lamps, including fiber optic bili lights as well as baby cots, bilimeters and oxygen tents

Recently updated

Oxygen Hood
Oxygen Hood

GINEVRI oxygen hood is a controlled environment chamber for administering accurate, consistent oxygen concentration to infants and is normally used with a heated nebulizer/humidifier to maintain adequate humidity and temperature. GINEVRI’s hood comes in different sizes with the neck opening fitting close enough to retain O2 concentrations, yet leaving sufficient space around the infants neck to permit CO2 displacement and provide a safety factor in case of oxygen delivery system failure.
More details

Resuscitation Trolley
Resuscitation Trolley

The Resuscitation Trolley is an easy and useful product which allows a complete portable set of instruments ready for providing first support to babies with respiratory distress. It is suitable both for delivery and post-delivery rooms, special care baby, neonatal intensive care units and everywhere it is needed.
More details

Humidifier
WETTY

The active servo-controlled WETTY humidifier is designed to heat and hydrate respiratory gases, and allows the thermo hygrometric conditions settings of the delivered gas mixture to patient and parameter control to be shown on the dual display. WETTY features a double heating system (humidification chamber and heated wiring), enabling servo-control of set temperature and humidity to prevent circuit condensation build-up.
More details

Critical Care

Oxygen Hood
Oxygen Hood

GINEVRI oxygen hood is a controlled environment chamber for administering accurate, consistent oxygen concentration to infants and is normally used with a heated nebulizer/humidifier to maintain adequate humidity and temperature. GINEVRI’s hood comes in different sizes with the neck opening fitting close enough to retain O2 concentrations, yet leaving sufficient space around the infants neck to permit CO2 displacement and provide a safety factor in case of oxygen delivery system failure.
More details

Humidifier
WETTY

The active servo-controlled WETTY humidifier is designed to heat and hydrate respiratory gases, and allows the thermo hygrometric conditions settings of the delivered gas mixture to patient and parameter control to be shown on the dual display. WETTY features a double heating system (humidification chamber and heated wiring), enabling servo-control of set temperature and humidity to prevent circuit condensation build-up.
More details

Warming Lamp
Antares

The Antares warming lamp is an overhead fixture designed for the treatment of newborns suffering from hyperthermia in beds, neonatal treatment tables or even changing units. It is equipped with a radiant heater and a halogen lamp illumination system, both managed by an electronic micro-processor control unit.
More details

Phototherapy Lamp
Elios

The Elios lamp has been designed to integrate intensive phototherapy and heating treatment of newborns who can be placed in beds, changing tables and neonatal treatment tables, with everything integrated for use and control by an electronic micro-processor controlled control module. It is equipped with an infrared radiant heating element for heating, six high efficiency blue power LEDs for intensive phototherapy treatment and four high-efficiency white power LEDs for illumination and inspection of the newborn.
More details

Ventilator
GIULIA V3

The GIULIA V3 intensive therapy ventilator offers VTV and HHFNC in addition to the synchronized and non-synchronized existing ventilation modes. It features different and dedicated flow sensors for invasive and non-invasive ventilation modalities, making it ideal for newborns, including low birth weight and premature ones.
More details

Incubator
OGB Polytrend

The OGB Polytrend neonatal incubator features a hood, base and other main components made completely from one-piece injection molded polycarbonate, with easy and complete disassembly for cleaning and disinfection. All settings and measured values are shown on the LCD display at the centre of the control panel, with a practical encoder on the control panel allowing for the setting of all parameters and surfing of various displays.
More details

Phototherapy Lamp
Naos Plus

The Naos Plus phototherapy lamp uses power LEDs for the treatment of hyper-bilirubin in newborns and features an electronic module which controls all the phototherapy and illumination functions, making it possible to manage multiple therapy cycles. It is equipped with six power blue LEDs for the treatment of jaundiced newborns that emit light energy in wavelengths centered around 455nm, resulting in power that is five-six times greater than normal fluorescent lamps and greatly increasing the treatment’s efficiency.
More details

Heating Mattress
Aquatherm

The Aquatherm heating mattress is designed to provide an additional heating source optimum control of patient’s temperature in any critical circumstance or application. It is equipped with a control unit to regulate the heating output and uses “Aquagel” technology to provide a pressure relieving surface next to the baby as well as reduce vibration.
More details

Baby Crib
Nido

The Nido baby crib is equipped with a trolley that has a solid and safe structure made of epoxy painted steel. The rounded shape of the hood guarantees the safety of the newborn and its design allows the mother to stay close to the baby.
More details

Infant Resuscitator
Baby Start

The Baby Start is a light and compact manual resuscitator designed to resuscitate asphyxiated neonates by mask or endotracheal tube. It can be installed on infant warmers, transport incubators or resuscitation trolleys, making it suitable for delivery rooms, postpartum, special units for neonatal care and NICUs.
More details

Infant Warmer
Alhena Plus

The Alhena Plus infant warmer provides more direct control of temperature, observation and free access to the baby for execution of medical procedures. It features four white daylight LEDs for illumination that make it possible to observe the baby without altering its natural color.
More details

Neonatal Ventilator
GIULIA

The GIULIA neonatal ventilator features improved nasal ventilation techniques which lowers the intubation rate in preterm infants, thus reducing morbidity and costs. It allows to easily choose between invasive or non-invasive ventilation, giving doctors the freedom to find the best mode to help newborns without compromising.
More details

Incubator
BABY SHUTTLE

The BABY SHUTTLE incubator is driven by a microprocessor, which controls all the parameters necessary to obtain the ideal microclimate for the premature baby in any environmental condition. It is equipped with the smooth tilt bed positioning system which allows for the continuous and smooth adjustment of the posture bed, while its crushproof hood grants the maximum strength and thermal insulation.
More details

Hospital Infrastructure

Resuscitation Trolley
Resuscitation Trolley

The Resuscitation Trolley is an easy and useful product which allows a complete portable set of instruments ready for providing first support to babies with respiratory distress. It is suitable both for delivery and post-delivery rooms, special care baby, neonatal intensive care units and everywhere it is needed.
More details

Patient Care

Double Phototherapy Lamp
Mizar

The Mizar double phototherapy lamp enables phototherapy to be done either from above or from below and also offers the unique function of radiant heating for emergency phototherapy and heating. The lamp delivers efficient heating to the patient in a short time with remarkable therapeutic potency for phototherapy treatment of hyperbilirubinemia.
More details

Clinical Laboratory

Bilirubin Analyzer
One Beam

The One Beam instrument allows for a rapid photo-metric analysis of the bilirubin total in the serum (totals of the conjugated and non-conjugated) using a capillary tube as an optical cell. It uses an algorithmic mathematical calculation to eliminate the hemoglobin interference factor, allowing for accurate measurement of the bilirubin concentration level in the blood.
More details
Copyright © 2000-2024 TradeMed.com. All rights reserved. | Terms And Conditions